Language en | €

Cart  

No products

Shipping 0,00 €
Tax 0,00 € Total 0,00 €

Check out

  • Smal electric mixer for glaze and casting, power 1020W

    Small electric mixer for glaze and casting, power 1010W

    Small electric mixer for glaze and casting, power 1010W Power 1010 W in 220 v Electronic speed variator Speed rotation from 360 to 680 tours/minutes for products of density until 1.8 kg/l Weight: 4.5 kg Steel propeller : lenght 600 mm Ø turbine 120 mm Joint turbine M14 Product capacity: from 10 to 15 kg or maxi 30 liters

    from 306,00 € tax incl.

  • Inox mixer 500 liters

    Inox mixer 500 liters for slip preparation glaze or glay

    inox tank - diameter: 800mm - height : 1000mm iron stand - Floor Height : 400mm 2” spherical exhaust gate valve Inox driveshaft with sea propeller 5.5 hp engine, Rotation 300 rpm two fixed inox lids, one loading pivot lid with security and safety system

    from 7 992,00 € tax incl.

  • Support for mixer serie MP

    Support for mixer serie Xo-45624

    Support for mixer serie Xo-45624   Support for mixer, construction in galvanized steel with foldable feet. Guiding column with gas compression spring Tare weight: 17 kg Unfolding dimensions : 455 x 4500 x H 1180 mm Maximun high for the bucket: 450 mm

    from 715,20 € tax incl.

  • Double INOX propeller15 à 20 kg for MXP 1000EQ et 1602

    Stainless steel propeller for mixer Xo1M - 41278

    Stainless steel propeller for mixer Xo1M - 41278

    from 103,20 € tax incl.

  • Double propeller for MXP 1602 inox 20 to 40 kg

    Stainless steel propeller for Xo6 capacity 20 to 40 kg - 41769

    Stainless steel propeller for Xo6 capacity 20 to 40 kg - 41769

    from 144,00 € tax incl.

  • Triple propeller 30 to 60 kg for MXP 1000 & MXP1602

    Aspiration of powder: clip Ref : 19040

    Aspiration of powder: clip Ref : 19040 Clip to be fixated at the border of the bucket : 19040 When you open a bag, when  you pour glaze or claw in powder, at the beginnig of the mixing, all this generate dust, which is not good for health and often irritating. This is not healthy for the operator and generate pollution at workplace. It is particurlarly to be avoiding for interior working. The aspiration accessory is fixated at the border on the mixing bucket in the same than a hoover. The spring clip can be attached to almost all mixing bucket. Switch on your hoover when you are ready to pour the powder or mix and you will work almost without any dust.

    from 72,00 € tax incl.

  • Triple propeller for MXP 1000 & MXP1602

    Plastic bucket for glaze or babotine 65 liters Ref : 60403

    Plastic bucket for glaze or babotine 65 liters Ref : 60403

    from 96,00 € tax incl.

  • Laboratory shaker Ø 50 x 250 mm n°51

    Plastic bucket for glaze or babotine 65 liters Ref : 60403

    Plastic bucket for glaze or babotine 65 liters Ref : 60403

    from 50,40 € tax incl.

  • Laboratory shaker Ø 50 x 250 mm n°51

    Locking clip for bucklet 65 and 90 liters Ref : 19180

    Locking clip for bucklet 65 and 90 liters Ref : 19180 Depanding which materials are using in, the mixing bucklet can spill. Which is dangerous and also annoying. Materials can spill and afterwards your workplace will be dirty. The locking clip helps you because it keeps the bucklet straight and in right position. Thanks to the holding wedge , you can fix quickly and easily bucklets of 65 and 90 liters.

    from 192,00 € tax incl.

  • Double shaker Ø 100 x 100 x 590 mm n°53

    Stainless steel wieve adaptable to the moving mixer 55 liters

    Stainless  steel wieve: 71064 Adaptable to the moving mixer  55 liters: ref 37102

    from 198,00 € tax incl.

  • Electric mixer for casting and glaze, power 1500W

    Electric mixer Xo6M for casting and glaze, power 1600W - 20442

    Electric mixer Xo6M for casting and glaze, power 1600W - 20442 Power 1600W in 220 V Electronic speed variator, + 2 mechanical speed Rapid ( low couple),  slow ( hard couple) Rotation speed N°1: 150 to 450 tours/minute Rotation speed N°2: 300 à 620 tours/minute for product of density until 2.2 kg/l Weight: 6.8 kg Steel propeller : lenght 600 mm Ø turbine: 120 mm Joint turbine M14 Product capacity from 20 to 40 kg or 90 liters maxi

    from 590,40 € tax incl.

  • Electric mixer for casting and glaze, power 1500W

    Moving mixer for glaze and barbotine 55 liters 1600W - 37102

    Moving mixer for glaze and barbotine 55 liters 1600W - 37102 Capacity of the bucket 75 liters for 55 liters of products (or 100 kg maxi) Power 1600 W in 220 V Speed rotation: 410 tr/min in loading (610 tr/min no load) Size : High 1190 mm Lenght 520 mm Widht 690 mm Tare weight : 42 kg Structure and propeller in steel, bucket in plastic with an stainless steel conduit. Back cover with a connection for hoover (aspiration of dust when you pour powders)

    from 2 700,00 € tax incl.